GROW Kit

Here you will find products prepared by MagicMushrooms.Space. Easy Kit and Mushbag. We use organic rye to prepare the substrate. Injections with spores are prepared in a laminar box. I take the prints from a proven Austrian supplier.

Dear customers, in the many years I have been running an e-shop, I dare say that success is always a lottery bet. I have tried many sterilization procedures. By standards, it is sufficient at 120 degrees Celsius, 1 Atm pressure, 60min. I do two sterilizations, the first at 115-120 °C for 120 min and the second on the second day without opening the autoclave at 115-20 °C for roughly 60 min. The preparation of injections takes place in a laminar box with UV sterilization. The vaccination step is the most important and at the same time we cannot completely control it and the contamination can be introduced. We are talking here about contamination at the level of bacteria, which is so small in size that we are not able to eliminate it from the air at home. There is no point in looking for whether this and that should be different or where I am making a mistake. It's not worth looking for if this and that should have been different or where I'm making a mistake. You can do the heating of the cooling needle the same way every time and the result will either work or not, that's my observation. Temperatures are important if you keep the temperatures lower than recommended and slow down the growth and prolong the time, at the same time there is room for the growth of unwanted contamination. If they are high again, you also support the growth of unwanted contamination, if any got during the vaccination. I write this here because I would like the customer to know what can happen and that it doesn't have to be anyone's fault.

I use sterilization indicator tape. Green before sterilization, tape turns black after sterilization.